Follow these simple steps to securely install your wall shelf in just a few minutes!

Can be installed by one person. Acrylic glass is less heavy than traditional glass and can be easily manipulated just by one person for assembly.

What You’ll Need:

• Shelf and brackets (included)
• Screws and wall plugs (included)
• Drill
• Screwdriver
• Spirit level (or your iPhone Measures app)
• Hammer 
• Pencil
• Tape measure

Step 1: Choose & Mark the Spot

1. Hold the shelf against the wall where you want to place it.

2. Use a spirit level to make sure it's straight.

3. Mark the bracket positions on the wall with a pencil. Recommended positions :
   30 cm / 40 cm : 2 cm from each ends
   60 cm : 10 cm each the ends
   80 cm : 15 cm each the ends

4. Mark the holes positions using one bracket on the positions previously marked (2 holes per bracket).

Step 2: Drill the Holes

1. Drill where you marked the holes positions.

2. Insert wall plugs in the holes with the hammer.

Step 3: Attach the Brackets

1. Align the brackets with the holes.

2. Screw them into place using the screws provided.

Step 4: Fix the Shelf

1. Place the shelf inside the brackets according to recommended position.

2. Gently screw from underneath to tighten the board inside the brackets. Be careful : do not tight too much risking damage on the board shelf.

Done!

Your shelf is now safely installed and ready to use. Make sure not to exceed the weight limit provided : up to 7 kg evenly distributed, no more.

Tips:

• Double-check level before final tightening.

• Ask a friend for help if you do not feel comfortable doing it alone.

• Before using, clean your shelf following our care instructions.